 |
| We stock the following brands: APE,
AKRAPOVIC, DID, EBC, FIBREGLASS & CARBON FIBRE, DYNOJET,
GOODRIDGE, HARRIS, J.E. PISTONS, K & N FILTERS, KENT CAMS,
MICRON, NITROUS OXIDE, OHLINS, P.F.M., REGINA, REMUS, RENTHAL,
SPRINT, WHITE POWER, WISECO, YOSHIMURA |
Kit Car Suzuki Hayabusa Turbo Parts
| Ride in / Ride Out Perfomance
Modifications including all Dyno Time |
Airbox with new injectors
|
£550.00
|
New EFI unit with map sensor
|
£410.00 |
Fuel Pump and Fuel Regulator
|
£140.00 |
Vacuum and Fuel Hoses
|
£20.00 |
Boost Gauge with Bracket
|
£60.00 |
Silencer
|
£150.00 |
Headers
|
£400.00 |
Modified Mitsubishi turbo with adj' wastegate
& blow off valve & short exhaust
|
£750.00 |
Cylinder Barrel Spacer Gasket
|
£50.00 |
Steel Cylinder Head Gasket
|
£60.00
|
Additional Suzuki gaskets and suzuki oil
filter
|
£40.00 |
Adjustable Cam Sprocket
|
£60.00 |
Clutch upgrade kit
|
£80.00 |
Brackets and Fasteners, etc
|
£30.00 |
| Total |
£2,800.00 |
| |
|
* Air Filter
|
£20.00 |
* Intercooler
|
£20.00 |
* Air Hoses
|
£20.00 |
* Oil Cooler Hoses
|
£20.00 |
| |
|
Labour (Ride in/Ride out inc' Dyno Time,
etc)
|
£500.00 |
| |
|
# 10mm Heavy Duty Cylinder Studs with Nuts
|
£80.00 |
# J.E. Forged Turbo Pistons
|
£480.00 |
# Heavy Duty Starter Idler Gear
|
£115.00 |
# Billet Clutch Centre (eliminates judder
on quick starts)
|
£150.00 |
# High Capacity Oil Pump Gears
|
£60.00 |
# High Ratio 5th and 6th Gears
|
£380.00 |
| |
|
Items marked "#" are optional.
Fitting of high ratio gears has an additional labour charge
of £200.00
All other optional extra parts have no additional labour charge
Items in italics * can be supplied by Holeshot if required.
Prices for these items are a guide.
Most customers prefer to source these parts to suit there
own requirements.
Note: Bigger turbo version also available, includes
new headers, larger hybrid turbo, larger injectors, hks wastegate
and dump valve, uprated fuel pump, etc. Capable of running
450H.P.at the wheel.
Additional cost of this package including all parts and labour
is + £500.00
12mm Extra Heavy Duty cylinder stud upgrade. Requires top
crankcase holes machining to M12,
Requires cyl' head stripping and block and head machining
out to 13mm clearance
Additional cost of this work is: Machining £180.00.
Labour £120.00. Studs & Spacers £60.00
|
|
|
 |
